Datasheet4U Logo Datasheet4U.com

MAX12527 - Dual 65Msps 12-Bit IF/Baseband ADC

Datasheet Summary

Description

The MAX12527 is a dual 3.3V, 12-bit analog-to-digital converter (ADC) featuring fully differential wideband track-and-hold (T/H) inputs, driving internal quantizers.

Features

  • a 166µW powerdown mode to conserve power during idle periods. A flexible reference structure allows the MAX12527 to use the internal 2.048V bandgap reference or accept an externally applied reference and allows the reference to be shared between the two ADCs. The reference structure allows the full-scale analog input range to be adjusted from ±0.35V to ±1.15V. The MAX12527 provides a common-mode reference to simplify design and reduce external component count in differential analog input circuit.

📥 Download Datasheet

Datasheet preview – MAX12527

Datasheet Details

Part number MAX12527
Manufacturer Maxim Integrated Products
File Size 687.20 KB
Description Dual 65Msps 12-Bit IF/Baseband ADC
Datasheet download datasheet MAX12527 Datasheet
Additional preview pages of the MAX12527 datasheet.

📁 Similar Datasheet

  • MAX125 - 2x4-Channel / Simultaneous-Sampling 14-Bit DAS (Maxim)
  • MAX1253 - 12-Bit System Monitors (Maxim)
  • MAX1254 - 12-Bit System Monitors (Maxim)
  • MAX1259 - Battery Manager (Maxim)
  • MAX120 - 500ksps / 12-Bit ADCs (Maxim)
  • MAX1200 - 16-Bit Self-Calibrating ADC (Maxim)
  • MAX1201 - 14-Bit Self-Calibrating ADC (Maxim)
  • MAX1202 - 12-Bit ADCs (Maxim Integrated)
  • MAX1203 - 12-Bit ADCs (Maxim)
  • MAX1204 - 5V / 8-CHANNEL / SERIAL / 10-BIT ADC (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX12528 - Dual 80Msps 12-Bit IF/Baseband ADC
  • MAX12553 - 14-Bit 65Msps 3.3V ADC
  • MAX12555 - 14-Bit 95Msps 3.3V ADC
  • MAX12557 - Dual 65Msps 14-Bit IF/Baseband ADC
  • MAX12559 - Dual 96Msps 14-Bit IF/Baseband ADC
  • MAX1257 - Multichannel ADCs/DACs
  • MAX1258 - Multichannel ADCs/DACs
  • MAX12000 - 1575MHz GPS Front-End Amplifier

Full PDF Text Transcription

Click to expand full text
19-3543; Rev 0; 2/05 KIT ATION EVALU E L B AVAILA www.DataSheet4U.com Dual, 65Msps, 12-Bit, IF/Baseband ADC General Description The MAX12527 is a dual 3.3V, 12-bit analog-to-digital converter (ADC) featuring fully differential wideband track-and-hold (T/H) inputs, driving internal quantizers. The MAX12527 is optimized for low power, small size, and high dynamic performance in intermediate frequency (IF) and baseband sampling applications. This dual ADC operates from a single 3.3V supply, consuming only 620mW while delivering a typical 69.8dB signal-tonoise ratio (SNR) performance at a 175MHz input frequency. The T/H input stages accept single-ended or differential inputs up to 400MHz.
Published: |